Skip to Content

What Is NVMe Storage?

What is NVMe?

NVMe (non-volatile memory express) is a storage transfer protocol for accessing data quickly from flash memory storage devices such as solid-state drives (SSDs).

Fast, high-throughput, and massively parallel, the NVMe base specification enables flash memory to communicate directly with a computer via a high-speed peripheral component interconnect express (PCIe) bus.

Extensions to the NVMe specification, maintained by NVM Express, are also available for a variety of network transfer protocols, including TCP, Fibre Channel, and InfiniBand.

In this article, we’ll cover what NVMe is, how it works, and the larger role it plays in the data centre.

How does NVMe work?

The NVMe specification describes a high-performance transfer protocol for connecting flash memory with host machines. Here’s how NVMe works:

  1. The host writes I/O command submission queues and doorbell registers (i.e., ready signals).
  2. The NVMe controller fetches and executes the I/O command queues and returns I/O completion queues followed by an interrupt to the host.
  3. The host records the I/O completion queues and clears the door register.

The end result is significantly lower overhead when compared with traditional transfer protocols such as SAS and SATA.

Also, NVMe is optimised for non-uniform memory access (NUMA). This means it was designed to allow for multiple CPU cores to manage queues.

Put it all together and we have a specification that capitalizes on the massively parallel, low latency data paths of NVMe without incurring the traditional costs of translating NVMe commands.

Test Drive FlashArray

Work in a self-service environment to experience the management of a Pure FlashArray. Explore advanced features, including snapshots, replication, ActiveCluster™, and even VMware integration.

Try Now

Benefits of NVMe Storage

NVMe storage’s main benefits include:

  • Faster transfer speeds (55-180 IOPS for HDDs vs. 3K-40K IOPS with SSDs)
  • Higher data throughput
  • Lockless connections that provide each CPU core with dedicated queue access to each SSD
  • Massive parallelism with over 64K queues for I/O operations

NVMe Storage vs. SATA SSD

Traditionally, NVMe SSDs connect to the CPU of a controller via Serial ATA (SATA), which is a computer bus interface initially introduced for hard-disk drives (HDDs). Early SSDs were designed to work with SATA merely to take advantage of the ubiquity of the technology. Today, PCIe is the preferred physical interface for SSDs. The NVMe transfer protocol allows manufacturers to take advantage of SSD technology when interfacing through a PCIe.

What is NVMe over fabrics (NVMe-oF)?

NVMe-oF is the practice of connecting NVMe storage systems with hosts over a network or data fabric. A data fabric simply refers to the network architecture, transfer protocol, and other technologies and services that allow data to be accessed and managed seamlessly across this network. It’s about extending the low latency and performance capabilities of NVMe over PCIe to storage area networks (SANs) through NVMe-friendly standards for popular transfer protocols such as Ethernet, Fibre Channel, and TCP.

The NVMe over fabrics (NVMe-oF) specification was created and is currently maintained by NVM Express, an open collection of standards for non-volatile memory technologies. Let’s take a closer look at NVMe transfer protocols supported by this standard.

What is NVMe over Fibre Channel (NVMe/FC)?

NVMe over Fibre Channel (also known as NVMe/FC or NVMe-FC) is a high-speed transfer protocol for connecting NVMe storage systems to host devices over fabrics. It supports the fast, in-order, lossless transfer of raw block data between NVMe storage devices in a network.

The original Fibre Channel Protocol (FCP) was designed to transport SCSI commands over Fibre Channel networks. It has become the dominant protocol used to connect servers with shared storage systems. While traditional FCP can be used to connect servers with NVMe storage devices, there’s an inherent performance penalty incurred when translating SCSI commands into NVMe commands for the NVMe array.

NVMe/FC supports the transfer of native NVMe commands, eliminating this translation bottleneck. This unlocks the full potential of FCP as a transport technology for end-to-end NVMe storage solutions, including parallelism, deep queues, multi-queueing, and high-speed data transfer.

What is NVMe over TCP (NVMe/TCP)?

NVMe over TCP (NVMe/TCP) is a low-latency transfer protocol that allows you to use standard Ethernet TCP/IP networking equipment natively with NVMe storage.

TCP/IP is the default transfer protocol used by the internet by which messages are broken up into packets to avoid having to resend an entire message in the event of a disruption of service. As an extension of the NVMe-oF specification, NVMe/TCP allows you to send NVMe commands using the same TCP/IP protocol transfer packets you use to transmit other types of data.

The plug-and-play ease and lower cost of standard Ethernet makes it an economical solution for connecting your NVMe storage devices over a data fabric. Ethernet also provides a greater range of network speeds and queue paths for data transport when compared to traditional iSCSI.

Why is NVMe vital for modernising your data centre?

In an increasingly challenging market, big data is no longer enough to maintain a competitive edge—it must also be fast. And how do you make big data fast? You start in the server room.

Transitioning from HDDs to SSDs is a good place to start, but it’s only one piece of the storage area network (SAN) puzzle. The transfer protocol, interconnects, and networking architecture also play important roles in the overall speed of your storage system.

That means replacing legacy technologies, such as serial attached SCSI (SAS), with NVMe/PCIe and NVMe over fabrics (NVMe-oF). There’s an inherent advantage to using a transfer protocol specifically designed to communicate natively with NVMe storage technologies.

Traditional storage systems use SAS links from their controller processors to the SSDs. Because SCSI is a legacy protocol designed for disk, each connection from the CPU core to the SSD is limited by the SAS host bus adapter (HBA) and synchronized locking. This serial bottleneck holds back flash arrays that don’t take advantage of newer protocols like NVMe.

Pure Storage® FlashArray™ was specifically designed to overcome this SAS bottleneck. NVMe brings massive parallelism with up to 64K queues and lockless connections that can provide each CPU core with dedicated queue access to each SSD.

Why choose Pure Storage for NVMe storage?

Pure Storage leverages the increased transfer speeds of native NVMe transfer protocols to provide performant all-flash storage solutions.

Designed from the bottom up to maximise the potential of NVMe storage, Pure solutions include:

  • DirectFlash® Fabric: Delivering performance close to DAS, DirectFlash Fabric offers enterprise-class reliability and data services.
  • Evergreen™: Our portfolio of storage-as-a-service subscriptions allows you to non-disruptively upgrade your hardware with no downtime, no migrations, and no degradations in performance.
  • Pure1®: Our AI-driven data services platform provides predictive analytics that help you catch bugs and address bottlenecks before they happen.
  • Purity: Purity’s AI abstracts away the complexity of managing a data centre, providing you with a simple dashboard for complete control over your data.
  • Portworx®: The most complete Kubernetes data services platform, Portworx provides a fully integrated solution for persistent storage, data protection, disaster recovery, and more for container workloads.

All Pure solutions leverage NVMe storage to unlock the full potential of flash memory. Let’s take a closer look at the underlying hardware solutions from Pure.

Enterprise NVMe solutions for file, object, and block storage

Pure Storage offers on-premises all-flash solutions for all your block, file, and object storage needs:

  • FlashArray//X: A performance-optimised all-flash array for Tier 0 and Tier 1 block storage applications
  • FlashArray//XL: Top tier performance at petabyte scale for your most demanding workloads
  • FlashArray//C: A capacity-optimised all-flash array for Tier 2 block storage applications
  • FlashBlade®: An all-flash, scale-out, network attached storage (NAS) solution for file and object storage

Pure Storage leverages the increased transfer speeds of NVMe to provide all-flash storage solutions that can support your most demanding block, file, and object storage workloads.

Resources and Events
RESORTS WORLD LAS VEGAS | JUNE 18 - 21
Pure//Accelerate® 2024

Join us June 18-21 and level up your data success.

Register Now
PURE //
Blogs
BLOG ARTICLE
Optimise GenAI Apps with Retrieval-augmented Generation
7 min. read

Learn how Pure Storage is working with NVIDIA to help enterprises optimise their AI efforts.

Read the Blog
PURE //
Resources
RESOURCE
10 Ways Pure Helps You Uncomplicate Storage, Forever
PDF

Discover 10 ways Pure Storage® can help you uncomplicate storage, forever.

Read More
PODCAST
Reality Check On Storage as a Service and Evergreen//One
33 Min

Learn about Pure's Evergreen//One subscription offering and the white glove support we provide Evergreen//One customers.

Listen Now
CONTACT US
Meet with an Expert

Let’s talk. Book a 1:1 meeting with one of our experts to discuss your specific needs.

Questions, Comments?

Have a question or comment about Pure products or certifications?  We’re here to help.

Schedule a Demo

Schedule a live demo and see for yourself how Pure can help transform your data into powerful outcomes. 

Call Sales: 800-976-6494

Mediapr@purestorage.com

 

Pure Storage, Inc.

2555 Augustine Dr.

Santa Clara, CA 95054

800-379-7873 (general info)

info@purestorage.com

CLOSE
Your Browser Is No Longer Supported!

Older browsers often represent security risks. In order to deliver the best possible experience when using our site, please update to any of these latest browsers.